A105 API Forged Steel Globe Vale With Socket-Welding End, Threaded
End, Flange End
Standard or Nonstandard: Standard
Connection End type: Bolted Bonnet Socket-Welding End, Threaded
End, Flange End, Socket-Welding & Threaded End (to order)
Pressure: Medium Pressure
Power: Manual or Actuated
Temperature of Media:Normal Temperature
Media: Oil, Gas, Water, Steam, Acids
Package:wooden case packing or as required
Forged Globe Valves API 602:
Globe valves are mainly installed to modulate or?regulate the
volume of the flow. A globe valve is not recommended when
a?continuous flow of fluid is required due to the high pressure
drop inherent to?the design of the valves itself. This type of
valve should always be installed to?ensure that the flow intake
enters through the base of the valve seat. The?valve has an arrow
stamped on the body to indicate the preferred direction on?flow.
Globe valves may be used with fluids containing particles in
The Features of Globe Valve:
Bolted Bonnet,Outside Screw and Yoke,Rising stems,Metallic Seating
The stem is of integral forged desig. The minimum diameter of the
stem shall per the standard requirement.
Bellville Spring Loaded Packing Impacking System:
If being requested by the customer, the Belleville spring loaded
packing impacting system can be adopted for enhancing the
durability and reliability of the packing seal.
Back Seating Design:
All our globe valve have the back seating design. In most cases,
the carbon stell globe valve is fitted with a renewable back seat.
For stainless steel globe valve, the back seat is machined directly
in the bonnet or is machined after welding. When the globe valve is
at fully open position ,the sealing of the back seat can be very
reliable. However,as per the requirement of API, it is not
advisable to add or change placking by the mean of back seating
when the valve is pressure containing.
For carbon steel globe valve, the seat is ususlly forged steel. The
sealing surface of the seat is spray welded with hard alloy
specified by the customer. Renewable threaded seat is used for
NPS≤12 carbon steel globe valves.FOR Stainless stell globe valve,
integral seat is ususlly adopted, or to weld hard alloy directly
integrally. Threaded or welded on seat is also optional for
stainless steel globe valve if being requested by the customer.
Usually, the stem nut is made of ASTM A439 D2. It is also can be
made of copper ally if being requrested by the customer. For large
sized globe valve,rolling bearing is fitted at the two sides of
stem nut in order to minimize the open and close torque of the
Special Globe Valve:
Besides the common globe valves,we also makes cryogenic globe
valve. Bellow sealed globe valve, Jacketed globe valve, etc.
NPS: 1/2'' - 2"
Pressure rating: 150-800,900-1500
Cold storage, chemical industry, petrochemical industry, machinery,
urban construction, fire fighting, water treatment, metallurgy,
electric power etc
To avoid any mistake and make a suit solution for your enquiry ,
please kindly specify the following informaiton:
- Design standard.
- Connection standard .
- Bore Size, pipe schedule ID / OD
- Body material .
- Trim (Material for inside parts).
- Connection End type.
- Actuation (manual, gear, actuator and type)
- Medium & Component. Flow rate Min./Max.
- ANSI pressure class, Operating temperature, operating /
differential pressure Ambient temperature range Corrosion
- Bore Size, pipe schedule ID / OD
- Application Descripetion.
- Document requirement , such as : Mill certificate , Material
Certificate ,Test Report ,etc...
- Test & Inspection requirement , Such as : Hydraulic test ,
Material Analysis , Chemical compoent analysis ,etc
1) service standards in quality, efficiency and reliability
2) extensive know-how of piping business and technologies
3) best source for selected european piping products
4) competitive prices and fast response time
5) extensive reference list in piping supplies